Citizendia

Insulin pump attached to its user with an infusion set.
Insulin pump attached to its user with an infusion set. An infusion set is used with an Insulin pump as part of intensive insulin therapy.
Insulin pump, showing an infusion set loaded into spring-loaded insertion device. A reservoir is attached to the infusion set (shown here removed from the pump).
Insulin pump, showing an infusion set loaded into spring-loaded insertion device. An infusion set is used with an Insulin pump as part of intensive insulin therapy. A reservoir is attached to the infusion set (shown here removed from the pump).
Filling an insulin pump reservoir. (Right to left) 1: Reservoir in sterile packaging. 2: Filling the reservoir. 3: Reservoir with needle and plunger removed, ready for attachment to infusion set.
Filling an insulin pump reservoir. (Right to left) 1: Reservoir in sterile packaging. 2: Filling the reservoir. 3: Reservoir with needle and plunger removed, ready for attachment to infusion set.
Customizing the basal rate pattern (units per hour) on an insulin pump
Customizing the basal rate pattern (units per hour) on an insulin pump


An insulin pump is a medical device used for the administration of insulin in the treatment of diabetes mellitus, also known as continuous subcutaneous insulin infusion therapy. Insulin is a Hormone with intensive effects on both metabolism and several other body systems (eg vascular compliance Diabetes mellitus (ˌdaɪəˈbiːtiːz or /ˌdaɪəˈbiːtəs/ /məˈlaɪtəs/ or /ˈmɛlətəs/ often referred to simply as diabetes ( Ancient Greek: grc The subcutaneous tissue or subcutis is the layer of Loose connective tissue directly underlying the Dermis. The device includes:

An insulin pump is an alternative to multiple daily injections of insulin by insulin syringe or an insulin pen and allows for intensive insulin therapy when used in conjunction with blood glucose monitoring and carb counting. A syringe is a simple piston Pump consisting of a plunger that fits tightly in a tube An insulin pen is an Insulin injection system for the treatment of Diabetes. Intensive insulinotherapy is a therapeutic regimen for Diabetes mellitus treatment Blood glucose monitoring is a way of testing the concentration of Glucose in the blood ( Glycemia)

Contents

Setting up

In order to use an insulin pump, the reservoir must first be filled with insulin. Some pumps are designed to be used with prefilled cartridges that are replaced when empty. Most, however, must be filled with insulin of the user's choice (usually Novolog, Humalog, or Apidra). An insulin analog is an altered form of Insulin, different from any occurring in nature but still available to the human body for performing the same action as human insulin Setting up includes:

  1. Opening a new (sterile) empty pump reservoir of the manufacturer's design;
  2. Withdrawing the plunger;
  3. Inserting the needle into a vial of insulin;
  4. Injecting the air from the reservoir into the vial to prevent a vacuum forming in the vial as insulin is withdrawn;
  5. Drawing insulin into the reservoir with the plunger, and then removing the needle;
  6. Squirting out any air bubbles from the reservoir, and then removing the plunger;
  7. Attaching the reservoir to the infusion set tubing;
  8. Installing the assembly into the pump and priming the tubing (pushing insulin and any air bubbles through the tubing) - it is essential that this is done with the pump disconnected from the body to prevent accidental insulin delivery;
  9. Attaching to the infusion "site" (and priming the cannula if a new set has been inserted).

Dosing

An insulin pump allows the replacement of slow-acting insulin for basal needs with a continuous infusion of rapid-acting insulin.

The insulin pump delivers a single type of fast-acting insulin in two ways:

Bolus Shaping

An insulin pump user has the ability to influence the profile of the rapid-acting insulin by shaping the bolus. While each user must experiment with bolus shapes to determine what is best for any given food, they can improve control of blood sugar by adapting the bolus shape to their needs. Blood sugar, used in a physiological context is a misnomer and misleading

A standard bolus is an infusion of insulin pumped completely at the onset of the bolus. It is most similar to an injection. By pumping with a "spike" shape, the expected action is the fastest possible bolus for that type of insulin. The standard bolus is most appropriate when eating high carb low protein low fat meals because it will return blood sugar to normal levels quickly.

An extended bolus is a slow infusion of insulin spread out over time. By pumping with a "square wave" shape, the bolus avoids a high initial dose of insulin that may enter the blood and cause low blood sugar before digestion can facilitate sugar entering the blood. The extended bolus also extends the action of insulin well beyond that of the insulin alone. The extended bolus is appropriate when covering high fat high protein meals such as steak, which will be raising blood sugar for many hours past the onset of the bolus. The extended bolus is also useful for those with slow digestion (such as with gastroparesis or Coeliac disease). Coeliac

A combination bolus is the combination of a standard bolus spike with an extended bolus square wave. This shape provides a large dose of insulin up front, and then also extends the tail of the insulin action. The combination bolus is appropriate for high carb high fat meals such as pizza, pasta with heavy cream sauce, and chocolate cake.

A super bolus is a method of increasing the spike of the standard bolus. Since the action of the bolus insulin in the blood stream will extend for several hours, the basal insulin could be stopped or reduced during this time. This facilitates the "borrowing" of the basal insulin and including it into the bolus spike to deliver the same total insulin with faster action than can be achieved with spike and basal rate together. The super bolus is useful for certain foods (like sugary breakfast cereals) which cause a large post-prandial peak of blood sugar. It attacks the blood sugar peak with the fastest delivery of insulin that can be practically achieved by pumping.

Bolus Timing

Since the pump user is responsible to manually start a bolus, this provides an opportunity for the user to pre-bolus to improve upon the insulin pump's capability to prevent post-prandial hypoglycemia. A pre-bolus is simply a bolus of insulin given before it is actually needed to cover carbohydrates eaten.

There are two situations where a pre-bolus is helpful:

  1. A pre-bolus of insulin will mitigate a spike in blood sugar that results from eating high glycemic foods. Infused insulin analogs such as NovoLog and Humalog typically begin to impact blood sugar levels 15 or 20 minutes after infusion. Insulin aspart (marketed by Novo Nordisk as "NovoLog/NovoRapid" is a fast acting Insulin analogue. Insulin lispro (marketed by Lilly as "Humalog" is a fast acting Insulin analogue; it was the first insulin analogue As a result, easily digested sugars often hit the bloodstream much faster than infused insulin intended to cover them, and the blood sugar level spikes upward as a result. If the bolus were to be infused 20 minutes before eating, then the pre-bolused insulin will be hitting the bloodstream simultaneously with the digested sugars to control the magnitude of the spike.
  2. A pre-bolus of insulin can also combine a meal bolus and a correction bolus when the blood sugar is above the target range before a meal. The timing of the bolus is a controllable variable to bring down the blood sugar level before eating again causes it to increase.

Both the blood sugar level as well as the type of food eaten have an impact on the ideal time to pre-bolus with the pump. New insulin analogs are "fast" enough to be given right before a meal, but this is ideal only when starting with a blood glucose value that is within range and the food to be eaten is of moderate glycemic index. If a time period of 15 or 20 minutes is considered to be a "time increment," then the pre-bolus time can be estimated by multiple increments. The time period is increased by one increment when blood glucose is high or when glycemic index is high. Time increments can also double, cancel, or go negative as the situation calls for as shown in the table below. Note however that an extended bolus allowed from the newer insulin pumps may be more convenient than a delayed standard bolus for a situation with low BG and low glycemic food to slow down the action of insulin.

Bolus Timing: the ideal time to pre-bolus depends upon the blood glucose level and the glycemic index. In medicine a bolus (from Latin bolus, ball is the administration of a Medication, Drug or other compound that is given to raise The Glycemic index (also glycaemic index) or GI is a measure of the effects of Carbohydrates on Blood glucose levels
If The Blood Glucose Level Before Eating Is:
High GI FoodsModerate GI FoodsLow GI Foods
Above Target Range30-40 min before eating15-20 min before eating0-5 min before eating
Within Target Range15-20 min before eating0-5 min before eating15-20 min after eating
Below Target Range0-5 min before eating15-20 min after eating30-40 min after eating

Basal Rate Patterns

The pattern for delivering basal insulin throughout the day can also be customized with a pattern to suit the pump user.

Basal Rate Determination

Basal insulin requirements will vary between individuals and periods of the day. The basal rate for a particular time period is determined by fasting while periodically evaluating the blood sugar level. Neither food nor bolus insulin must be taken for 4 hours prior to or during the evaluation period. If the blood sugar level changes dramatically during evaluation, then the basal rate can be adjusted to increase or decrease insulin delivery to keep the blood sugar level approximately steady.

For instance, to determine an individual's morning basal requirement, they must skip breakfast. On waking, they would test their blood glucose level periodically until lunch. Changes in blood glucose level are compensated with adjustments in the morning basal rate. The process is repeated over several days, varying the fasting period, until a 24-hour basal profile has been built up which keeps fasting blood sugar levels relatively steady. Once the basal rate is matched to the fasting basal insulin need, the pump user will then gain the flexibility to skip or postpone meals such as sleeping late on the weekends or working overtime on a weekday.

Many factors can change insulin requirements and require an adjustment to the basal rate:

A pump user should be educated by their diabetes care professional about basal rate determination before beginning pump therapy.

Temporary Basal Rates

Since the basal insulin is provided as a rapid-acting insulin, the basal insulin can be immediately increased or decreased as needed with a temporary basal rate. Examples when this is helpful include:

Advantages of pumping insulin

Disadvantages of pumping insulin

How to handle interruptions of pump therapy

If a pump user is disconnected from their pump for a very brief amount of time or even overnight, they must follow new guidelines in hopes of best control.

How to Handle Interruptions of Pump Therapy.
Amount of Time for the Interruption:
1 hour or less1 to 3 hoursDuring daytime hoursOvernight
What to do:Before disconnecting from insulin pump, check blood glucose. If it is in range, give a bolus for the anticipated time missed. If blood glucose is out of range (higher), give a bolus for time missed, plus for the elevated sugar. Monitor blood gluclose. Take an(y) injection(s) of short-acting insulin for any carbohydrate consumed. Same directions as before, plus monitoring blood glucose every 1 1/2 hours. Same directions as before, plus monitor blood glucose every 3 to 4 hours. Monitor blood glucose. Give boluses for any corrections of blood glucose and/or time missed. To do this, take short acting insulin every 4 hours to compensate for the long acting insulin. For example: A basal rate of . 500 units per hour, take 2 full units every 4 hours.

Acceptability

Use of insulin pumps is increasing throughout the world because of:

Recent developments

New insulin pumps are becoming "smart" as new features are added to their design. These simplify the tasks involved in delivering an insulin bolus.

Current insulin pump manufacturers

Future developments

Bibliography

External links


© 2009 citizendia.org; parts available under the terms of GNU Free Documentation License, from http://en.wikipedia.org
Dapyx Software network: MP3 Explorer | Ebook Manager | Zenithic